google-site-verification=QEIpXCi9JfNHnO1X3-4XzHy7Sv9AJlFS64nRODvm6Y4 gv-xjvqzox4e74
top of page
Search

How to Use Milkshake Curl Passion Products for Every Curly Hair Type

Curly hair rarely misbehaves for no reason. Most frizz, flat roots, limp waves, crunchy ends, and undefined coils come down to one thing: the routine does not match the curl pattern, density, or moisture needs.


Milkshake Curl Passion products are designed as a curl-focused system, but that does not mean every product has to go on every head of hair every wash day. The best routine uses the right cleanser, the right amount of conditioning, and the right styling layers for your curl type.


Here is how to use Curl Passion Shampoo and Conditioner, Curl Passion Mask, Curl Passion Primer, Curl Passion Leave-in Conditioner, Curl Passion Enhancing Fluid, Curl Passion Curl Shaper, and Curl Passion Curl Perfectionist without weighing hair down or leaving curls under-styled.


Eye-level view of curl care products beside a towel and wide-tooth comb.
A simple setup makes curl wash day easier to repeat.

Start with the role each Curl Passion product plays


A curl routine works better when every product has a clear job. If two products are doing the same thing, curls can feel coated. If one step is missing, curls can dry out or lose shape by midday.


Product

Best use

How often to use it

Curl Passion Shampoo

Cleanses the scalp and removes buildup from styling products

Every wash day or as needed

Curl Passion Conditioner

Softens, detangles, and adds slip after shampoo

Every wash day

Curl Passion Mask

Gives deeper conditioning when curls feel dry or rough

Weekly or when hair needs extra care

Curl Passion Primer

Prepares damp hair before styling and helps create an even base

On styling days

Curl Passion Leave-in Conditioner

Adds lasting moisture and makes curls easier to manage

After washing, especially on dry curls

Curl Passion Enhancing Fluid

Helps boost curl definition and softness

On damp hair or for light refreshes

Curl Passion Curl Shaper

Adds shape and hold for more defined curls

On damp hair before drying

Curl Passion Curl Perfectionist

Polishes curls, softens frizz, and finishes the style

After drying or during refreshes


The key is to think in layers:


  1. Cleanse

  2. Condition

  3. Treat when needed

  4. Prime

  5. Moisturize

  6. Define

  7. Finish


Fine waves may only need four of those steps. Dense coils may need most of them, but in controlled amounts and with plenty of water during application.


Use the wash products without stripping or weighing curls down


Healthy-looking curls begin in the shower. Styling products can only do so much if the hair starts either coated with buildup or dry from harsh cleansing.


Curl Passion Shampoo


Use Curl Passion Shampoo on the scalp first, not the ends. Apply a small amount to wet hair, massage with fingertips, and let the lather move through the lengths as you rinse.


For wavy hair, one shampoo is usually enough unless there is heavy product buildup.


For curly hair, focus on a thorough scalp massage. Curls often need scalp cleansing more than aggressive scrubbing through the ends.


For coily hair, work in sections if the hair is dense. This helps the shampoo reach the scalp without tangling the lengths.


Rinse well. Styling products sit better when shampoo is fully removed.


Curl Passion Conditioner


Apply Curl Passion Conditioner from mid-lengths to ends. If the roots get oily or flat easily, keep conditioner away from the scalp. If the hair is very dry or tightly coiled, bring it closer to the roots but still focus on the lengths.


Use this step for detangling. Add water to the hair before adding more conditioner. Water often gives more slip than piling on extra product.


A good method is:


  • Apply conditioner to soaking wet hair

  • Detangle with fingers or a wide-tooth comb

  • Let it sit briefly while finishing the shower

  • Rinse fully for waves, or lightly for tighter, drier curls if the hair tolerates it


Curl Passion Mask


Curl Passion Mask is for days when regular conditioner is not enough. Use it after shampoo in place of conditioner, or after conditioner if the hair is especially dry.


It is most useful when curls feel:


  • Rough at the ends

  • Frizzy even with styling product

  • Difficult to detangle

  • Dull or stiff

  • Dry after colour services or heat styling


For fine waves, use the mask sparingly and rinse very well. For medium curls, once a week can work well. For dense coils, apply in sections so every area gets product, then rinse enough that the hair feels soft, not coated.


Close-up view of conditioner being combed through wet curls.
Detangling works best when hair is wet, slippery, and handled gently.

Match the styling products to your curl type


The styling side of the Curl Passion range gives you options. The mistake is using every styler in a thick layer. Choose based on what the hair needs most: moisture, definition, hold, or frizz control.


Type 2 waves need light layers and root lift


Wavy hair can lose shape if it gets too much cream or leave-in. The goal is to support the wave pattern without flattening it.


Best Milkshake Curl Passion products for waves:


  • Curl Passion Shampoo

  • Curl Passion Conditioner

  • Curl Passion Primer

  • Curl Passion Enhancing Fluid

  • Curl Passion Curl Perfectionist


On wash day, shampoo and condition as usual. After rinsing, gently squeeze out excess water with your hands. Apply Curl Passion Primer through damp hair, using a light mist or small amount, depending on the format of the product.


Next, use Curl Passion Enhancing Fluid. Start small. For shoulder-length waves, a pea-sized to nickel-sized amount is often enough. Scrunch upward from the ends and avoid raking too much, which can pull waves straighter.


If waves need more polish once dry, smooth a tiny amount of Curl Passion Curl Perfectionist over the outer layer. Keep it away from the roots.


Skip heavier leave-in on days when the hair already feels soft. Use Curl Passion Leave-in Conditioner only when waves feel dry, tangled, or frizzy.


Type 3 curls need moisture plus definition


Type 3 curls usually respond well to layered styling. They need enough moisture to prevent frizz and enough hold to keep curl clumps intact.


Best products for curls:


  • Curl Passion Shampoo

  • Curl Passion Conditioner

  • Curl Passion Mask

  • Curl Passion Primer

  • Curl Passion Leave-in Conditioner

  • Curl Passion Curl Shaper

  • Curl Passion Curl Perfectionist


After washing and conditioning, apply products to very damp hair. If curls start drying before styling, re-wet with a spray bottle.


Start with Curl Passion Primer to create an even base. Follow with Curl Passion Leave-in Conditioner, focusing on the ends and any dry sections. Use praying hands, raking, or finger-combing depending on how much separation you want.


Then apply Curl Passion Curl Shaper. This is the defining step. Scrunch until curls spring back and form clumps.


Diffuse on low heat and low airflow, or air dry without touching the curls too much. Once dry, use Curl Passion Curl Perfectionist to soften the finish and smooth the canopy.


For many type 3 curls, the winning combination is primer, leave-in, curl shaper, finish.


Type 4 coils need sectioning, water, and patient layering


Coily hair often needs more moisture and more careful distribution. Product that sits on top of coils will not perform well, so sectioning makes a real difference.


Best products for coils:


  • Curl Passion Shampoo

  • Curl Passion Conditioner

  • Curl Passion Mask

  • Curl Passion Primer

  • Curl Passion Leave-in Conditioner

  • Curl Passion Enhancing Fluid

  • Curl Passion Curl Shaper

  • Curl Passion Curl Perfectionist


After cleansing, use Curl Passion Conditioner or Curl Passion Mask to detangle in sections. Rinse with care, keeping the hair organized to reduce tangles.


On soaking wet or very damp hair, apply Curl Passion Primer section by section. Follow with Curl Passion Leave-in Conditioner. Add water as needed so the product spreads easily.


For defined wash-and-go styles, apply Curl Passion Curl Shaper in small sections and smooth it along the hair. Finger coil, shingle, or scrunch based on the curl pattern and preferred finish.


For softer, less structured coils, use Curl Passion Enhancing Fluid after the leave-in instead of a stronger shaping layer. Finish with Curl Passion Curl Perfectionist once the hair is fully dry.


Coils often look best when they are not touched during drying. Let the cast or shape set first, then fluff at the roots.


Overhead view of curly hair divided into neat styling sections.
Working in sections helps styling products reach every curl.

Build a routine for your hair’s texture, density, and condition


Curl type is helpful, but it is not the whole story. Two people with type 3 curls can need totally different routines if one has fine, low-density hair and the other has thick, colour-treated hair.


Use the guide below to adjust your Curl Passion routine.


If your hair is fine


Fine curls and waves get weighed down quickly. Use fewer products and lighter amounts.


Try this routine:


  1. Curl Passion Shampoo

  2. Curl Passion Conditioner, rinsed well

  3. Curl Passion Primer

  4. Curl Passion Enhancing Fluid or Curl Passion Curl Shaper

  5. Curl Passion Curl Perfectionist only on dry ends


Avoid using the mask and leave-in heavily on the same day unless the hair is very dry.


If your hair is thick or dense


Thick curls need more product distribution, not necessarily a huge amount in one place. Sectioning gives better results than applying one big handful.


Try this routine:


  1. Curl Passion Shampoo

  2. Curl Passion Conditioner or Curl Passion Mask

  3. Curl Passion Primer, section by section

  4. Curl Passion Leave-in Conditioner

  5. Curl Passion Curl Shaper

  6. Curl Passion Curl Perfectionist after drying


Use a spray bottle while styling. Curls usually define better when damp enough for product to glide.


If your hair is dry


Dry curls need conditioning and gentle styling. They may also need less frequent shampooing, depending on scalp needs and product buildup.


Focus on:


  • Curl Passion Mask once a week or as needed

  • Curl Passion Leave-in Conditioner after washing

  • Curl Passion Enhancing Fluid for softness

  • Curl Passion Curl Perfectionist to finish dry ends


Do not skip cleansing for too long. Buildup can make dry curls feel even more brittle because water and conditioner cannot reach the hair as well.


If your hair gets frizzy easily


Frizz can come from dryness, rough handling, humidity, or not enough hold. Start by applying stylers to wetter hair.


Use this order:


  1. Curl Passion Primer

  2. Curl Passion Leave-in Conditioner

  3. Curl Passion Curl Shaper

  4. Curl Passion Curl Perfectionist after drying


Avoid touching curls while they dry. Once fully dry, smooth or scrunch in the finisher.


If your curls fall flat


Flat curls often need less conditioning at the roots and more hold in the styling step.


Try:


  • Rinsing conditioner more thoroughly

  • Using Curl Passion Mask less often

  • Applying leave-in only to the ends

  • Choosing Curl Passion Enhancing Fluid for waves

  • Using Curl Passion Curl Shaper where definition is needed

  • Diffusing with the head tilted for lift


Flat roots can also happen when too much product sits near the scalp.


Layer the products in the right order


Product order matters because water-based prep, moisturizing products, and defining stylers each behave differently.


A simple full routine looks like this:


  1. Cleanse with Curl Passion Shampoo


    Massage the scalp and rinse well.


  2. Condition with Curl Passion Conditioner


    Detangle while the hair has slip.


  3. Treat with Curl Passion Mask when needed


    Use it when curls feel dry, rough, or hard to manage.


  4. Prep with Curl Passion Primer


    Apply to damp hair before styling products.


  5. Moisturize with Curl Passion Leave-in Conditioner


    Focus on mid-lengths and ends.


  6. Define with Curl Passion Enhancing Fluid or Curl Passion Curl Shaper


    Use Enhancing Fluid for softer, lighter definition. Use Curl Shaper when curls need more structure.


  7. Finish with Curl Passion Curl Perfectionist


    Apply after drying to smooth frizz and polish the curl shape.


You do not need to use both Enhancing Fluid and Curl Shaper every time. If the hair is wavy or fine, choose one. If the hair is curly or coily and needs more support, you can layer them lightly, with the fluid first and the shaper after.


Side view of defined curls drying with a diffuser.
Low heat and gentle airflow help curls keep their shape.

Use the right technique for better curl definition


The products matter, but technique decides the final look.


For more curl clumps, apply products on wetter hair and use praying hands before scrunching. This smooths the outer layer and helps curls group together.


For more volume, use slightly less leave-in and diffuse with the head tilted. Once dry, lift gently at the roots with fingertips.


For less frizz, blot with a microfibre towel or cotton T-shirt instead of rubbing with a bath towel. Then keep hands out of the hair until it is fully dry.


For better refresh days, mist curls with water first. Add a tiny amount of Curl Passion Enhancing Fluid or Curl Passion Curl Perfectionist, then scrunch. If curls feel dry, mix a small amount of Curl Passion Leave-in Conditioner with water in your hands and glaze it over the ends.


If the style feels crunchy, wait until the hair is completely dry, then scrunch gently with clean hands or a small amount of Curl Passion Curl Perfectionist. If the style feels greasy or limp, use less leave-in or mask next time.


A sample Curl Passion routine for each curl family


Here is a practical starting point.


Curl type

Wash day routine

Styling focus

Loose waves

Shampoo, light conditioner, primer, enhancing fluid

Keep layers light and scrunch for shape

Strong waves

Shampoo, conditioner, primer, curl shaper

Add hold without coating the roots

Classic curls

Shampoo, conditioner or mask, primer, leave-in, curl shaper

Balance moisture and definition

Tight curls

Shampoo, mask, primer, leave-in, curl shaper, perfectionist

Apply in sections for even coverage

Coils

Shampoo, mask, primer, leave-in, enhancing fluid or curl shaper, perfectionist

Use water, sections, and gentle drying


Treat this as a starting routine, not a rule. If curls look limp, remove one moisturizing layer. If curls look dry, add more water during styling or use the mask more often. If curls lose shape by the end of the day, use Curl Passion Curl Shaper more intentionally through the lengths.


Close-up view of soft defined curls after styling.
The right mix of moisture and hold leaves curls soft and shaped.

The takeaway


The best way to use Milkshake Curl Passion products is to build a routine around what your curls actually need that day. Start with Curl Passion Shampoo and Conditioner as your base. Add Curl Passion Mask when hair feels dry or rough. Use Curl Passion Primer before styling, then choose Leave-in Conditioner, Enhancing Fluid, Curl Shaper, and Curl Perfectionist based on your curl type and desired finish.


For waves, keep it light. For curls, layer moisture and definition. For coils, work in sections and keep the hair damp while styling.


Curly hair becomes easier to manage when the routine is consistent, but not overloaded. Use the products with purpose, adjust the amount, and let your curl pattern show you what works.


 
 
 

Comments


Hours

Monday - Saturday

10 - 9 pm

Sunday

11 - 6 pm

 

 

Location

West Edmonton Mall

8882 170 St

Edmonton Alberta

T5T4M2

3rd Phase 

Infront of Sea Lions 1st Floor

by 

Waterpark

bottom of page
gv-jj5g6udtjlyhwt.dv.googlehosted.com